Introduction to the function of the new thermostat

ETC-902

 

 1.Working conditions

    Power supply: 230VAC+10% 50/60Hz

     Rated current of relays: 8A/220VAC

     Ambient temperature: -15C~60C Relative humidity: 20% ~ 85% (No condensate)

     Storage temperature: -15C~60C

 

SH-100-2

 

2.Specification:

    Product: Length 77x Width 34.5 x Depth 58 (mm)

    Sensor wire length: 2M (including the sensor)

    Temperature controlling range: -50C ~ 99

 

3. Technical Parameters:

    Temperature controlling range: -50C ~ 99

    Display resolution: 19C/0.1C (With the switch mode between integer and decimal)

    Accuracy: NTC: +0.5C (-30°C-50′C), others, +1C

    Sensor type: NTC (-50C~ 120C) PTC (-50C~ 150C)

 

 1 (2)

STC-3028

 

Product Description
Switch the modes between cool and heat;Control temperature by
setting the temperature setting value and the difference value;
Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds, temperature limit or when sensor error.


Feature:
Be able to control temperature and humidity at the same time.
Be able to connect with humidifier and dehumidifier equipment at the same time.
Be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time.
Heating/Cooling function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity Control. Supporting Temp and Humidity Calibration
 Be able to display measured temperature/humidity and set temp/humidity at the same time


Specification: 
Iput voltage: AC110~220V* 10%, DC24V, DC12V
Measuring temperature range: -20 ~ +80°C

Measuring humidity range: 00%RH~+100%RH  Accuracy: ±1, 0. 1%RH
Relay output contact capacity: 10A/240VAC  Sensor length: 1m
Set start up temperature(humidity):
Press the ”up” button once to display the starting temperature(humidity). Long press the ”up” button for about 3 seconds.The required temperature(humidity) can be set by the up and down key.

H3e47ed066cfb41618481c07c2414d896Q

 

STC-3008

 

Features:
1. ABS flame retardant plastic shell, more safe to use.
2. Microcomputer intelligent digital display thermostat, dual display dual temperature.
3. With Dual NTC Sensor for convenient usage, line length is about 1 meter.
4. The large and clear digital display shows measuring temperature, high accuracy of temperature measuring and controlling.
5. Suitable for automatic switching of refrigeration and heating devices such as seafood machines and cooling water machines.

 

Specification:
Optional Voltage: 12V/24V/110V – 220VAC
Temperature Control Range: 110 ° C
Screen Display: Dual Screen Dual Display
Machine Power Consumption: Less Than 3W
Temperature Measurement Accuracy: ±1 °C (-50 °C ~ 70 °C)
Resolution: 0.1 ° C
Sensor: 2*NTC Sensor (line length is about 1 meter)
Ambient Temperature: 0~60°C
Relative Humidity: 20%~85% (no condensation)
Machine Size: Approx. 75 x 34.5 x 85mm / 3 x 1.4 x 3.3in
Installation Opening: Approx. 71 x 29mm / 2.8 x 1.1in
Housing Material: ABS flame retardant plastic shell

 

 

 

XM-18

 

Main Technical Index:

1. Temperature Measuring Range: 0-99℃

2. Temperature Measurement Accuracy: ±0.1℃

3. Humidity Measurement Range: 0—99%RH

4. Humidity Accuracy: ±3%RH

5.Number of signal-output: 7, (over-temperature, temperature control, insufficient temperature, egg left-turning, egg right-turning, humidity control, alarm)

6. The maximum output load current: temperature control, insufficient temperature ≤ 8A/AC220V, over-temperature, egg left-turning, egg right-turning, humidity control, alarm ≤ 1A / AC22

7.Number of egg-turning: the maximum record is 999 times.

8. Cycle of egg-turning: adjustment of 0 – 999 minutes (the factory default is 90 minutes)

9. Egg-turning time: adjustment from 0 to 999 seconds (the factory default is 180 seconds)

10.Ventilation cycle: from 0 to 999 minutes

(The factory default is 120 minutes)

11. Ventilation time: from 0 to 999 seconds (the factory default is 30 seconds)

12. Temperature measurement length: About 2 meters

 

Working Condition:

1.Working Voltage: AC 160V - 240V,50HZ

2.Relative Humidity: less than 85% RH

3.Environment Temperature: -10℃ – 60℃

 

SHT-2000

 

Features:
1. ABS flame retardant plastic shell, more safe to use.
2. Microcomputer intelligent digital display thermosta.
3. With One humidity Sensor for convenient usage, line length is about 1 meter.
4. The large and clear digital display shows measuring temperature and humidity, high accuracy of temperature and humidity measuring and controlling.
5. Suitable for automatic switching of refrigeration and heating devices such as egg incubator.

Specification:
Product Name: Temperature and Humidity Controller

Product Model: SHT2000

Supply voltage: DC 12V / DC 24V / AC 110~230V
Power supply frequency: 50/60Hz

Temperature range: -20~60°C
Humidity range: 0%~100%RH

Temperature measurement accuracy: 0.3 °C
Humidity measurement accuracy: 3%

Output Control: Relay Output
Output Power: MAX 10A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Post time: Aug-17-2021