Function introduction of new temperature controller SHT-2000

SHT-2000主图

Temperature and humidity controller SHT-2000

Features:
1. ABS flame retardant plastic shell, more safe to use.
2. Microcomputer intelligent digital display thermosta.
3. With One humidity Sensor for convenient usage, line length is about 1 meter.
4. The large and clear digital display shows measuring temperature and humidity, high accuracy of temperature and humidity measuring and controlling.
5. Suitable for automatic switching of refrigeration and heating devices such as egg incubator.

Specification:
Product Name: Temperature and Humidity Controller

Product Model: SHT2000

Supply voltage: DC 12V / DC 24V / AC 110~230V
Power supply frequency: 50/60Hz

Temperature range: -20~60°C
Humidity range: 0%~100%RH

Temperature measurement accuracy: 0.3 °C
Humidity measurement accuracy: 3%

Output Control: Relay Output
Output Power: MAX 10A

Heating/cooling mode setting:

Setting mode: setting (starting temperature): Press and hold the  button to start the temperature flashing. Use  key to set the starting temperature value.

Setting (stop temperature): Press and hold the  button to stop the temperature flashing. Use  to set the stop temperature value.

 

Heating use case: control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again

Step 1: heating mode, starting temperature <stop temperature

Step 2: Press and hold the  button to start the temperature flashing. Use  to set the starting temperature to 50 °C.

Step 3: Press and hold the  button to stop the temperature flashing. Set the stop temperature to 65 °C with  keys, and the setting is completed!

 

Refrigeration use case: use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.

Step 1: cooling mode, starting temperature > stop temperature

Step 2: Press and hold the  button to start the temperature flashing. Use  to set the starting temperature to 30 °C.

Step 3: Press and hold the  button to stop the temperature flashing. Use  to set the stop temperature to 26°C. The setting is completed!

SHT-2000,4

Humidification/Dehumidification Mode Settings:

Setting (start humidity): Press and hold ∧ key to start the humidity value flashing. Set the humidity value by ∧∨ key. Set [Stop Humidity]: Press and hold ∧ key to stop the humidity value flashing, and set the humidity to stop by ∧∨ key value.

 

Humidification example: fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification.

 

Setup steps:

Step 1: Press and hold the ∧ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.

Step 2: long press the ∨ button for 3 seconds to stop the humidity value flashing, set the value to 80% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.

 

Dehumidification example: workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification

 

Setup steps:

Step 1: Press and hold the ∧ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.

Step 2: Press and hold the ∨ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.

SHT-2000,3

 

 

 


Post time: Aug-17-2021